https://embodied-ai-radar.com/topics/hardware.xml 2026-11-10T00:00:00ZEmbodied AI Radar https://arxiv.org/abs/2611.12130 2026-11-10T00:00:00Z

Hand kinesthetic feedback is crucial for restoring and enhancing human perception of force and displacement in robotic hand teleoperation. Wide perception range of force feedback is vital in rendering objects of different stiffness, especially for high-stiffness rendering. However, existing approaches struggle to achieve wide range of force feedback while maintaining compact and wearable design. This paper presents a hand exoskeleton system employing magnetorheological (MR) brakes to provide a wide range kinesthetic feedback during teleoperation. The MR brake provides a braking torque ranging …

https://arxiv.org/abs/2611.11718 2026-11-10T00:00:00Z

Reinforcement learning (RL) requires large amounts of interaction data or a reliable simulator, both hard to obtain for nonlinear soft robotic hardware. Recent work shows that a time-scale separation inherent to soft robot dynamics justifies their reduction to low-dimensional invariant manifolds, known as adiabatic spectral submanifolds (aSSMs). We demonstrate that an aSSM-reduced model, a simple polynomial ordinary differential equation learned purely from pre-collected data, can serve as an RL training environment. On a pneumatically actuated soft arm, we train a trajectory-tracking policy …

https://arxiv.org/abs/2611.11709 2026-11-10T00:00:00Z

A purely data-driven method grounded in the theory of adiabatic spectral submanifolds (aSSMs) was recently used to model and control nonlinear soft robotic simulators. Here, we extend the methodology to learn aSSM-reduced models from data collected from hardware soft robotic platforms. Specifically, we learn a five dimensional (5D) aSSM-reduced nonlinear ordinary differential equation (ODE) that accurately models the dynamics of a soft-helicoid trunk robot. We then use this ODE in a model predictive control scheme to demonstrate real-time precision control across various challenging …

https://arxiv.org/abs/2611.09877 2026-11-09T00:00:00Z

Tendon-driven continuum robots can reach through constrained spaces, but contact along their bodies is invisible to the sensors at their motors. We show that this is a structural limitation rather than a tuning problem: the map from contact forces to tendon measurements has a null space of dimension at least seven, so no estimator that leaves the contact support free can locate contact. When the obstacle geometry is known, however, non-penetration and complementarity make the contact force locally identifiable, and we prove that the resulting system with unknown contact inputs is locally …

https://arxiv.org/abs/2611.07091 2026-11-06T00:00:00Z

Constant- and piecewise-constant-curvature models are widely used to simplify the kinematics of continuum robots, although the assumed curvature profiles are not necessarily inherent mechanical properties of the robot and may therefore be violated during operation. Rather than assuming a prescribed curvature profile in the kinematic model and estimating deviations from it, this paper presents a multi-segment scissor-based support structure that mechanically constrains a continuum robot to exhibit prescribed constant or spatially varying curvature profiles. The design uses Taylor …

https://arxiv.org/abs/2611.06214 2026-11-05T00:00:00Z

Inspired by the coordination of global motion and local shape adaptation in snakes, elephant trunks, and octopus arms, we propose a unified planning and control framework for mobile continuum robots in cluttered and confined environments. Existing approaches often address high-level path planning and local motion control separately, limiting coordinated base-arm motion, kinematic consistency, and collision avoidance. Our framework integrates long-horizon trajectory planning with real-time geometric refinement under kinematic and environmental constraints. The global layer combines A* search …

https://arxiv.org/abs/2611.05615 2026-11-05T00:00:00Z

High motion performance and avoiding structural vibrations rely on smooth trajectory planning. The smoothness requirement depends on the robot's complexity in terms of the number of degrees of freedom and system order due to the flexibility of the joints and links. For industrial robots, the smoothness requirements have been determined and subsequently taken into account. Although unknown for soft continuum robots, the exact smoothness requirement can potentially be much larger than previously considered ones such as $\mathbf{\mathcal{C}^4}$ for collaborative robots and …

https://arxiv.org/abs/2611.03648 2026-11-03T00:00:00Z

General-purpose mobile manipulation requires a combination of capable robot hardware, scalable demonstration collection, expressive whole-body control, and effective policy learning. Yet these components are often developed independently, creating mismatches that limit the capabilities of the complete system. We present Pixel, a co-designed full-stack system for learning general-purpose mobile manipulation. Pixel combines a low-cost wheeled humanoid with human-aligned kinematics and compliant grippers, multiple teleoperation and robot-free human data-collection interfaces, a unified …

https://arxiv.org/abs/2611.03418 2026-11-03T00:00:00Z

Myoelectric Control Systems (MCSs) enable voluntary control of wearable robots through muscle activity. However, intention decoding, assistance shaping, and low-level actuator control are often not explicitly distinguished, making their contributions difficult to evaluate and compare. This review introduces a functional decoder-shaper-controller framework for continuous myoelectric control of upper-limb exoskeletons. The decoder estimates an intention-related variable from surface electromyography (sEMG), the shaper maps it to a control reference according to an assistance policy, and the …

https://arxiv.org/abs/2611.03216 2026-11-03T00:00:00Z

Soft robot co-design methods can jointly optimise morphology and control, but the resulting designs are often difficult to manufacture, while manufacturable approaches typically restrict actuator placement or require manual assembly. We present a simulation-based co-design framework that jointly optimises material distribution, pneumatic actuator placement and orientation, and control, while producing designs that can be fabricated monolithically using fused deposition modelling. The framework uses a differentiable 2D plane-stress Material Point Method simulator, incorporating an …

https://arxiv.org/abs/2611.02794 2026-11-03T00:00:00Z

Robust multimodal perception for soft robotic grasping is challenged by modality-dependent noise, semantic ambiguity, and limited coordinated multisensory data. We introduce Soma, a dataset containing 100 objects, 1,000 continuous grasping trajectories, and 74,914 multimodal samples grouped by software acquisition cycle, spanning remote RGB, hand RGB, depth, tactile, IMU, and structured text observations. We also collect Soma-Success, an independent grasp-outcome dataset with 1,000 trials (998 retained after quality control), to evaluate frozen-encoder transfer for post-hoc grasp outcome …

https://arxiv.org/abs/2611.01581 2026-11-03T00:00:00Z

To reduce reliance on manual design and extensive parameter tuning, a framework for the autonomous evolution of exoskeleton assistance policies through human feedback is proposed. Assistance policies are autonomously generated as executable control code by an intelligent agent and evaluated in experiments with human participants. Subjective user feedback, movement performance, and muscle activation measurements are incorporated into policy assessment. Based on these assessments, policy deficiencies are autonomously identified and the control code is revised by the agent for subsequent trials. …

https://arxiv.org/abs/2611.00283 2026-11-03T00:00:00Z

Held-out validation loss is the standard offline signal for choosing checkpoints and comparing models, but its relation to closed-loop success on a real robot is rarely measured. We measure it for ACT, Diffusion Policy, SmolVLA and $\pi_{0.5}$ (action expert only), trained on nested subsets of 12 to 200 demonstrations of a pick-and-place task on an SO-101 arm. We score 82 checkpoints on 25 held-out demonstrations, with each policy's training loss and with the error of the actions it outputs, and compare the scores with 930 bench rollouts. We also score all 700 intermediate checkpoints of 70 …

https://arxiv.org/abs/2610.41981 2026-11-02T00:00:00Z

Data-driven controllers have enabled lower-limb robotic exoskeletons to adapt assistance to the user across many tasks. A leading example is biological torque control, which estimates the user's own joint moment from onboard sensors and assists in proportion to that estimate. However, its estimators are trained on data recorded with the target device, so deploying the controller on new hardware requires collecting new data. Existing open-source efforts release hardware, software, or controllers separately, so this data collection must still be repeated on the assembled device. Here, we …

https://arxiv.org/abs/2610.40600 2026-10-30T00:00:00Z

This work proposes a novel conveyor belt mechanism enabling continuous, active repositioning of functional elements along the body of a tendon-driven continuum robot. Up to three conveyor belt mechanisms are integrated within a 9 mm diameter continuum robot. We demonstrate equivalent or reduced conveyor belt actuation forces compared to robot tendon actuation forces. As a case study, we mount permanent magnets along two conveyor belts, and demonstrate actively reconfigurable inter-robot coupling. Coupling point location and quantity can be adjusted during robot operation to actively tune the …

https://arxiv.org/abs/2610.39055 2026-10-30T00:00:00Z

Controlling continuum robots' shape to operate in confined, enclosed environments is challenging, since it cannot rely on external observation. Existing embedded shape sensing methods, although they can provide shape reconstruction, are insufficient to enable real-time shape control due to limitations in reconstruction accuracy, computational speed, and compatibility with shape-state representation. In this work, we present an embedded shape-sensing framework that uses readily available IMU and actuator feedback to reconstruct the continuum-robot shape with a neural network, providing …

https://arxiv.org/abs/2610.37441 2026-10-28T00:00:00Z

Objective: This study aims to determine whether a hip-exoskeleton policy trained in simulation, by co-adapting with a musculoskeletal human model under a metabolic-energy reward, reduces the metabolic cost of walking in new users without per-user tuning, and how mechanical-power shaping affects the learned assistance. Methods: We developed MARL-Exo, a multi-agent reinforcement learning framework in which a full-body human model (304 muscle actuators; randomized anatomy, gait, and speed) and a bilateral hip-exoskeleton policy are trained concurrently in two stages. The exoskeleton observes …

https://arxiv.org/abs/2610.37170 2026-10-28T00:00:00Z

We trained four widely used imitation-learning policies, ACT, Diffusion Policy, SmolVLA and $\pi_{0.5}$, on nested subsets of 12, 25, 50, 100 and 200 teleoperated demonstrations of one pick-and-place task with distractor objects, using one fixed training recipe per policy. Every trained model was then run on a physical SO-101 arm on a fixed set of object placements: 1,340 scored episodes in 126 blocks. ACT, trained from scratch, rose from 1 success in 40 episodes at 12 demonstrations to 37 in 40 at 100. $\pi_{0.5}$ with its action expert fine-tuned was the best policy when data was scarce (16 …

https://arxiv.org/abs/2610.37043 2026-10-28T00:00:00Z

Spacecraft-mounted robotic manipulators can support long-term operability of orbiting assets by conducting tasks such as on-orbit assembly, repair, upgrade, and refueling. In this context, the integration of continuum/soft robotic mechanisms into space manipulator designs promises to reduce stowage volume and mass, as well as to improve operational safety through the inherent mechanical compliance of soft structures. This work presents a novel state reconstruction pipeline for a hybrid soft-rigid space manipulator, in which the distal link is a tendon-driven continuum robot. The estimation …

https://arxiv.org/abs/2610.36681 2026-10-28T00:00:00Z

Animals exhibit diverse shape-changing behaviors, from the undulatory swimming of eels to the arching movements of inchworms. Reproducing these biological shapes with modular soft robots offers a promising approach to developing versatile bioinspired robotic systems. However, translating a desired shape into a feasible robotic configuration remains challenging. Existing cable-driven modular soft robots rely on computationally expensive physics-based modeling and combinatorial search for inverse design, making it difficult to efficiently reproduce diverse target shapes. To address this …

https://arxiv.org/abs/2610.31472 2026-10-23T00:00:00Z

Tactile sensing provides robots with contact information difficult to obtain from vision alone. Shear force is particularly important for understanding tangential contact, guiding corrective motions, and maintaining grasp stability, yet flexible and low-cost tactile arrays often measure only normal force. We introduce VecTile, a low-cost, 6 mm thin, flexible tactile array capable of three-axis force sensing. VecTile combines a piezoresistive layer with passive silicone nubs that convert normal and shear forces into distinguishable pressure patterns. The sensor can be fabricated in-house …

https://arxiv.org/abs/2610.31302 2026-10-23T00:00:00Z

Exoskeletons have shown great potential for augmenting human physical capabilities, yet generating reliable assistance remains challenging because human motion patterns and interaction requirements vary substantially in practice. To address this problem, a dual-loop assistance strategy is proposed to couple multimodal exoskeleton trajectory generation with variable admittance control, where trajectory variance links the outer-loop generator and the inner-loop controller. The generator synthesizes future exoskeleton trajectories through denoising, primarily using whole-body human motion and …

https://arxiv.org/abs/2610.27271 2026-10-21T00:00:00Z

Walking without vision requires timely, unambiguous guidance, yet many wearable aids encode directions as audio or vibrotactile signals that users must translate into movement. We present XoNav, a four-actuator hip exoskeleton that renders guidance cues directly at the hip joints. It renders an Advance cue and two-level Braking cues through sagittal-plane actuators and two-level Steering cues through frontal-plane actuators. A bilateral LSTM-based gait-state classifier uses two thigh-mounted IMUs to identify gait states, enabling haptic cues to be delivered in coordination with the wearer's …

https://arxiv.org/abs/2610.26445 2026-10-20T00:00:00Z

Electromyography (EMG)-driven control enables wearable robots to assist users based on their neuromuscular activity. Upper-limb exoskeletons typically rely on proportional myoelectric control (PMC), which amplifies user effort but may compromise stability at high assistance levels. EMG-driven adaptive gravity compensation (AGC) offers a promising alternative, counterbalancing gravitational torques while continuously adapting to neuromuscular activity. However, these approaches have not been systematically compared in a human-in-the-loop setting. This study evaluates five control algorithms: …

https://arxiv.org/abs/2610.25585 2026-10-20T00:00:00Z

Octopuses exhibit a powerful form of embodied intelligence from a highly adaptable soft body. One key mechanism is the ability to instantiate bending points at any location along the arm, which enables performant and dexterous behaviours. Taking inspiration from the octopus for its dexterity, this study focuses on changing the curvature of a tendon-actuated arm by adaptively changing the anchoring end-point along the arm. An array of inflatable shells is integrated into the arm, where inflating a shell causes an increase in friction at the location, jamming the tendon and creating a temporary …

https://arxiv.org/abs/2610.22977 2026-10-19T00:00:00Z

Low-cost passive leader arms enable scalable data collection for imitation learning, but their lack of restoring forces leaves redundant joints unconstrained, yielding highly inconsistent joint-space trajectories. We address this with a low-cost passive joint module (an adjustable mechanical clutch and a 3D-printed spiral spring) that pulls each joint toward a user-defined neutral posture. This passive restoring force acts as a physical prior equivalent to joint-space $L_2$ regularization (``Hardware-as-Regularization''), improving kinematic consistency with shorter completion time than an …

https://arxiv.org/abs/2610.22765 2026-10-19T00:00:00Z

Precise pedicel-targeted grasping in strawberry harvesting remains a critical bottleneck due to the pedicel's small diameter (1.3-3 mm), color similarity with surrounding foliage, and precise force control required for clean abscission zone detachment. As a market-grade crop, strawberry aesthetic value makes bruise-free pedicel detachment essential over direct fruit grasping. Classical approaches struggle to unify vision models, motion planning, and contact manipulation into a robust framework, particularly in occluded canopy environments. Therefore, this work presents a visuomotor imitation …

https://arxiv.org/abs/2610.19798 2026-10-14T00:00:00Z

Continuum robots enable dexterous access to confined spaces in applications such as minimally invasive surgery and industrial inspection. However, their actuation systems are often custom-designed for specific robot architectures and tasks, limiting reuse across publications, institutions, and applications. This paper presents a unified actuation platform that decouples actuation hardware and software from continuum robot design. The platform provides modular actuation across continuum robot classes, scales to a large number of degrees of freedom (DOFs), and integrates with conventional …

https://arxiv.org/abs/2610.18160 2026-10-13T00:00:00Z

Robotic harvesting of cherry tomatoes in greenhouses remains challenging due to dense fruit clusters, delicate skin, and the need for gentle yet effective detachment. This study presents a force-data-driven framework for autonomous cherry tomato harvesting that integrates six-axis force/torque sensing, a bio-inspired compliant gripper, and deployment on a mobile robotic platform. A wearable ATI six-axis force/torque sensor mounted on the index finger captured kinetic signatures of three elemental picking patterns (gripping, twisting, and lateral pulling) across 150 manual trials (50 per …